MengziEpoxy asphalt anti-corrosion coating

Epoxy Asphalt Anticorrosive Coating

I. Product Introduction

Asphalt anticorrosive coating is a composite coating based on epoxy resin and asphalt. Its basic principle is to form a strong, dense protective layer through the synergistic action of epoxy resin and asphalt in the coating, to resist corrosive factors in the environment. This coating is mainly composed of epoxy resin, asphalt, pigments and fillers, additives, and solvents, and has excellent anticorrosive properties, adhesion, and wear resistance.

• Product Features ：

Excellent anticorrosive performance: It has good resistance to various corrosive media such as acids, alkalis, and salts, and can effectively prevent corrosion of metal surfaces.

Good adhesion: Forms a good bond with metal surfaces, not easy to peel off.

Excellent wear resistance: The coating surface is smooth and hard, with good wear resistance.

Convenient construction: Can be applied by various methods such as brushing, spraying, and rolling. It has fast drying speed and short curing time. III. Scope of Application

Epoxy asphalt anticorrosive coating is widely used in petroleum, chemical, bridge, dock, power, and water conservancy fields for anticorrosive protection of metal pipelines, storage tanks, bridge structures, steel structures, etc.

IV. Construction Process & Precautions ：

Construction Method:

Substrate treatment: Remove oil stains, moisture, rust, and old coatings from the substrate surface.

Coating preparation: Mix each component evenly according to the formula.

Coating application: Select appropriate coating tools and methods, and apply the coating evenly on the substrate surface.

Curing treatment: Control the temperature and humidity of the coating environment to allow the coating to cure within the specified time.

Precautions:

Control the coating environment: Avoid construction in high humidity, high temperature, or low temperature environments to prevent affecting the curing speed and performance of the coating.

Control coating thickness: Avoid problems such as cracking and peeling due to excessive coating thickness, and also ensure that the coating thickness meets the anticorrosive requirements.

Pay attention to safety protection: During construction, ensure ventilation to avoid inhaling coating volatile substances; wear protective glasses, gloves, and other protective equipment to avoid direct skin contact with the coating.

V. 、 Storage and Safety Protection ：

The product should be stored in a cool and ventilated place, protected from direct sunlight, isolated from fire sources, and away from heat. 。

Keep the construction process dry and clean, strictly prohibit contact with water, acid, alcohol, alkali, etc.; after paint preparation, the curing agent packaging drum must be tightly sealed to prevent gelling. Operators should wear safety masks and gloves, avoid contact with skin or eyes. If accidental contact occurs, rinse with clean water.