Product Details
DB-6F Photocuring UV Lacquer series
Ⅰ、Introduction
DB-6F UV curable paint is a kind of paint which does not contain solvent and its components react and solidify into film under the action of UV light. At present, UV curable paint is widely used in the coating of wood, bamboo, plastic clips and metal parts. Due to its environmental protection performance, it will be more and more used in the coating of various products in the future.
Ⅱ、Purpose and characteristics
1.UV curable paint is mainly used for the coating of mobile phones, high-grade electrical appliances, motorcycles, electric bikes, high-grade cosmetics packaging, high-grade wood and other surfaces;
2.Good adhesion, high gloss, good fullness, high hardness, environmental protection, etc;
3.Different from the common PU paint, PE paint and NC paint used by ordinary furniture enterprises, it is a real green and environmental protection paint, free of any volatile substances, and the products using light curing paint are green, healthy and environmental protection;
4.UV curable paint film is three-dimensional structure, good hardness, wear resistance, good transparency, product scratch resistance, friction resistance, withstand the test of time.
Ⅲ、Technical parameters
|
Project |
Index |
Inspection standards and methods |
|
Condition of original paint |
Visual inspection |
Uniform, clear and transparent, without mechanical impurities |
|
Viscosity of original paint（S） |
Coating - 4, 25 ± - ℃ |
≥40 |
|
Paint mix |
Paint, solvent |
10: 1 or direct spraying of the original paint |
|
Adhesion (grade) |
Circle method |
≥1 |
|
Hardness |
Pencil hardness tester |
≥2H |
|
Gloss |
|
≥95 |
|
Flexibility |
|
|
|
Impact (g) |
|
|
|
Spraying air pressure (kg) |
|
0.4-0.6 |
|
Spraying gun distance（cm ） |
|
10-25 |
|
Film thickness（um） |
|
20-30 |
|
Drying conditions |
|
80w/cm3-5s |
|
Solid content of original paint |
120℃*2h |
≥90% |
Ⅳ、Storage and safety protection
1. The product shall be stored in a cool and ventilated place to prevent direct sunlight, isolate the fire source and keep away from the heat source;
2.Operators shall wear safety masks and gloves to avoid contact with skin or eyes. In case of inadvertent contact, clean with water.
