Welcome to Jiangmen Tufeng Chemical Co., Ltd.
TEL: +86-750-3988386
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
DB-2B Polyurethane Two-Component Paint Series
1. Introduction
DB-2B acrylic paint film has full luster, excellent weather resistance, water resistance and gasoline resistance, good gloss and color retention, excellent comprehensive performance, fast drying speed and convenient construction.
2. Ingredients
Hydroxy acrylic gum, pigments, additives, solvents, etc.
Curing agents, isocyanates, polyurethanes, thinners, etc.
3. Performance
This product can be used for surface varnishing of metal and plastic products, and has the characteristics of good chemical resistance, excellent leveling, high fullness, good hardness, water resistance and weather resistance.
4. Use
For motorcycles, automobiles, household appliances, mechanical metals and various metals such as ABS, PS, PC, HIPS, etc.
The plastic surface has excellent adhesion, and the product is widely used.
5. Product types
1. Two-component paint
2. Two-component glitter paint
3. Two-component pearlescent, phantom paint
4. Two-component varnish
5. Complete varieties, formulas can be formulated according to the requirements and color properties provided by customers
6. Construction parameters
Project |
Construction parameters |
Open dilution ratio |
Varnish - Paint: Hardener: Thinner = 2:1:2 |
Spray viscosity (NK-2# cup 20℃) |
9-14 |
Drying time(70℃/30min) |
Dry, toasted |
luster |
≥90 |
Hardness |
≥2H |
Weather resistance |
600-1000 hours |
Alcohol resistance 99% ethanol = 4.9N (0.5kgf) |
100 times |
Standard film thickness(um) |
10-20 |
7. paint film performance
Project |
Index |
Inspection standards |
|
Appearance and color of paint film |
Flat and smooth, the color conforms to the sample |
GB1729 |
|
luster(60℃)% |
Varnish, various colors |
≥94 |
GB9754 |
Matte, Glitter Paint |
Compliant with the target |
||
Dryness,H |
(Plastic) 60-70℃ BBQ |
4 |
GB1735 |
(Hardware) Bake at 80℃ |
4 |
||
Adhesion (Cross-Hatch) |
100/100 |
GB9286 |
|
Pencil hardness |
After drying ≥HB 2H after hard drying |
GB6739 |
|
Water resistance(40℃)240h |
No significant changes |
GB/T1733 |
|
Detergent resistance,24h |
No significant changes |
Immerse in saturated washing solution at room temperature |
|
Acid resistance,24h |
No significant changes |
Immerse in 0.1HN2SO4 solution at room temperature |
|
Alkali resistance,24h |
No significant changes |
Immerse in 0.1N NaOH solution at room temperature |
|
Mixed xylene resistance |
No yarn marks, reduced gloss and obvious gauze coloring |
Dip a cotton gauze with a mixture of xylene: ethanol = 6: 4 and wipe the paint film back and forth 8 times |
|
Volatile oil resistance,10h |
No discoloration, dissolution, swelling, etc. |
Immersion at room temperature (90#) gasoline:toluene=4:1 mixed solution |
|
Heat resistance,10h |
No significant changes |
GB1740 |
|
Salt spray resistance,120h |
No significant changes |
GB1771 |
|
Weather resistance, 40h artificial accelerated aging |
Loss of light level, discoloration level |
ASTMG53 |
8. Precautions
1. The paint should be fully stirred before use, and must be used up within 4 hours after mixing with the curing agent, so as not to affect the effect;
2. The product should be stored in a cool and ventilated place, protected from fire, leakage, sun protection, high temperature, and away from fire sources;
3. Operators should wear safety masks and gloves to avoid contact with skin or eyes, and should be washed with clean water in case of accidental contact.
CONTACT US
Add: Longan Industrial Zone, Duruan Town, Pengjiang District, Jiangmen City, Guangdong Province
Tel: +86-750-3988386
Mobile: +86-13822383835 (Ms. Wang)
Mobile: +86-13536058518 (Engineer Li Gong)
Email: sales@jmtufeng.com
FEEDBACK
Copyright © 2022 Jiangmen Tufeng Chemical Co., Ltd. 粤ICP备17115341号 SEO tags