Welcome to Jiangmen Tufeng Chemical Co., Ltd.
TEL: +86-750-3988386
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
DB-9K Rubber Paint Series
1. Introduction
DB-9K elastic rubber paint is a two-component polyurethane paint. The product after spraying has a special soft feeling, which makes the painted product comfortable and high-grade, thereby greatly improving the added value of the product.
2. Ingredients
Mixed with polyurethane resin, special additives, solvents, etc.
3. Scope of application
Surface coating of sports equipment products, binoculars, communication products, telephones, audio-visual products, MP3, computer mouse, interior decoration of cars, various plastic electronic products
4. Construction instructions
1. Before construction, the surface should be degreasing, rust and dirt, and dried;
2. Construction ratio - elastic paint: curing agent: thinner = 10:1:3 (depending on the spray effect can be adjusted appropriately)
3. The elastic paint and curing agent must be fully mixed and evenly filtered before use. The dry film thickness is 20-40mm. The sprayed workpiece should be
4. Put it in a dust-free space for 5-10 minutes and put it in the oven to dry after it becomes dumb.
5.70±5℃/30~40min.
5. Paint film performance
Project |
Index |
Inspection standards |
Appearance and color of paint film |
smooth and soft |
GB1729 |
luster(60℃)% |
≤8℃Compliant with the target |
GB9754 |
Adhesion (Cross-Hatch) |
100/100 |
GB9286 |
Water resistance(40℃)24h |
No significant changes |
GB/T1733 |
Detergent resistance,120h |
No significant changes |
Immerse in 5% chemical cleaning solution at room temperature |
Ethanol resistance |
No significant changes |
Use cotton gauze soaked in alcohol to wipe the paint film back and forth 50 times with a force of 300g |
Moisture and heat resistance,120h |
No wrinkles, breakage, pores, peeling, etc. |
GB1740 |
Weather resistance, 200h artificial accelerated aging |
No significant changes |
ASTMG53 |
6. Matters needing attention
Before the paint is used, the sediment at the bottom of the barrel should be fully stirred evenly to avoid inconsistency in matteness. The adjusted paint must be used up within 4 hours to avoid affecting the effect.
CONTACT US
Add: Longan Industrial Zone, Duruan Town, Pengjiang District, Jiangmen City, Guangdong Province
Tel: +86-750-3988386
Mobile: +86-13822383835 (Ms. Wang)
Mobile: +86-13536058518 (Engineer Li Gong)
Email: sales@jmtufeng.com
FEEDBACK
Copyright © 2022 Jiangmen Tufeng Chemical Co., Ltd. 粤ICP备17115341号 SEO tags