Welcome to Jiangmen Tufeng Chemical Co., Ltd.
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
Toy paint
I. Introduction: This product is formulated from resins, pigments, solvents, and additives. It features excellent scratch and abrasion resistance, fast drying with good adhesion, color and gloss retention, anti-yellowing properties, high gloss, diverse and bright colors, simple application, and wide applicability.II. Advantages: Tufeng brand toy paint features bright colors. The paint film dries quickly, with fast surface and through drying (1 hour). The paint film has high hardness, is flat, bright, and weather-resistant, shortening construction cycles, improving production efficiency, and providing good decorative effect. It's easy to apply, dries rapidly, has low requirements for the coating environment, possesses good hardness and brightness, is less prone to film defects, easy to repair, and does not scorch or bite the substrate.III. Application Scope: Tufeng brand toy paint is suitable for PS, HIPS, ABS substrates, modified plastics, sports equipment, toys, fairy lights, household showers, etc.IV. Technical Parameters:No. Item Parameter1 Baking Conditions 50~70° (bake for 30 minutes) specific to customer requirements2 Spraying Viscosity 9~13s (25℃, Iwata No. 2 cup)3 Spraying Pressure 3~4.5kg/㎡4 Spraying Distance 10~20cm5 Film Thickness 15~25um (wet film gauge)6 Hardness HB~H (ASTM D3363) (Mitsubishi pencil)7 Gloss (BS 3900 D5 60) >80%8 Specific Gravity 0.93-1.20 depending on color (ASTM D1475)9 Solid Content 30-50% depending on color10 Adhesion 0~1 grade (100% cross-cut method)11 Coating Viscosity 85±5KU/25°C (depending on different colors) (ASTM D4287)12 Surface Dry Time ≤30min/30℃13 Through Dry Time ≤24H/30℃14 Shelf Life One year/25℃ in a cool, dry place15 Dilution Ratio Paint 1: Thinner 1.5 by weight (specific to customer spraying requirements)Material Compliance: Conforms to heavy metal safety standards such as ASTM F963-08, EN71 Part 3 : 1994, Japan Part 3 : 2002 section 1.5, 16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007, etc., for organic and inorganic pigments.Application Conditions: Surface Treatment: Degreasing, cleaning, drying.
- Product Description
-
I. Introduction This product is formulated from resins, pigments, solvents, and additives. It has excellent scratch and abrasion resistance, fast drying with good adhesion, gloss and color retention, anti-yellowing, high gloss, diverse colors and brilliant luster, simple application and wide applicability.
II. Advantages Tufeng brand toy paint features. Bright colors. Fast film drying, quick surface dry and hard dry (1 hour), high film hardness, smooth and bright with good weather resistance, shortens construction period, improves production efficiency, good decorative effect, simple construction, fast drying, low requirements for coating environment, possesses good hardness and brightness, less prone to film defects, easy to repair, does not scorch or bite the substrate.
III. Application Scope Tufeng brand toy paint is suitable for PS, HIPS, ABS substrates, modified plastics, sports equipment, toys, fairy light wires, household showerheads, etc.
IV. Technical Parameters :
No.
Item
Parameter
1
Baking Conditions
50~70° (bake for 30 minutes) specific to customer requirements
2
Spray Viscosity
9~13s (25℃, Iwata No. 2 Cup)
3
Spray Air Pressure
3~4.5kg/㎡
4
Spray Distance
10~20cm
5
Film Thickness
15~25um (wet film gauge)
6
Hardness
HB~H (ASTM D3363) (Mitsubishi Pencil)
7
Gloss
(BS 3900 D5 60) >80%
8
Specific Gravity
0.93-1.20 depending on color (ASTM D1475)
9
Solid Content
30-50% depending on color
10
Adhesion
Grade 0~1 (100% cross-cut method)
11
Coating Viscosity
85±5KU/25°C (depending on color) (ASTM D4287)
12
Surface Dry Time
≤30min/30℃
13
Hard Dry Time
≤24H/30℃
14
Shelf Life
One year / 25℃ in a cool, dry place
15
Dilution Ratio
Paint 1:Thinner 1.5 by weight (specific to customer spraying needs)
Raw Material Compliance Meets ASTM F963-08, EN71 Part 3 : 1994, Japan Part 3 : 2002 1.5, 16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007 and other heavy metal safety standards for organic and inorganic pigments.
Application Conditions Surface treatment: degreasing, cleaning, drying
Previous Page:
Next Page:
Related Products
Product Message
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!