Anti-corrosive waterproof coating

Special paint for gas pipelines

Natural Gas Pipeline Special Coating I. Product Introduction: Natural gas pipeline special coating is a type of coating specifically used for the anti-corrosion coating of natural gas pipelines. It is designed to provide long-lasting and efficient anti-corrosion protection to ensure the safe operation and extended service life of natural gas pipelines. In the natural gas pipeline industry, the application of special coatings plays a pivotal role, not only resisting external environmental erosion of pipelines but also improving the overall performance of pipelines. II. Product Features: The main components of natural gas pipeline special coatings include resins, pigments, additives, and solvents. Among them, the resin, as the main component of the paint film, has good adhesion and corrosion resistance; pigments give the paint film specific color and hiding power; additves improve the coating's construction performance and storage stability; solvents adjust the viscosity of the coating, making construction more convenient. The characteristics of natural gas pipeline special coatings are mainly reflected in the following aspects: excellent adhesion, strong corrosion resistance, good weather resistance, and water resistance. These characteristics enable natural gas pipeline special coatings to adapt to complex and changeable usage environments, effectively protecting natural gas pipelines from external factors. III. Construction Methods and Precautions: During the construction of anti-corrosion coatings for natural gas pipelines, certain standards and techniques must be followed. First, ensure that the pipeline surface is clean and dry, free of oil stains, rust, and other impurities; second, according to the coating instructions, select the appropriate coating method and coating thickness; finally, pay attention to safety protection during construction to avoid fire and explosion hazards. At the same time, construction personnel must strictly abide by the coating construction process, control the coating interval time, and avoid defects between coating layers. After coating, necessary inspections and acceptance must be carried out to ensure that the coating quality meets the requirements. IV. Product Protection Performance and Application Range: Natural gas pipeline special coatings have demonstrated excellent protection performance in practical applications. Their weather resistance and corrosion resistance are superior to ordinary coatings, effectively resisting erosion from ultraviolet rays, rainwater, and chemical substances. Therefore, natural gas pipeline special coatings are widely used in urban natural gas pipelines, industrial natural gas pipelines, and other scenarios, providing strong protection for the safe operation of natural gas pipelines. In addition, natural gas pipeline special coatings are also suitable for pipelines of different materials, such as steel pipes, cast iron pipes, and plastic pipes, and have strong applicability and versatility.

Toy paint

I. Introduction: This product is formulated from resins, pigments, solvents, and additives. It features excellent scratch and abrasion resistance, fast drying with good adhesion, color and gloss retention, anti-yellowing properties, high gloss, diverse and bright colors, simple application, and wide applicability.II. Advantages: Tufeng brand toy paint features bright colors. The paint film dries quickly, with fast surface and through drying (1 hour). The paint film has high hardness, is flat, bright, and weather-resistant, shortening construction cycles, improving production efficiency, and providing good decorative effect. It's easy to apply, dries rapidly, has low requirements for the coating environment, possesses good hardness and brightness, is less prone to film defects, easy to repair, and does not scorch or bite the substrate.III. Application Scope: Tufeng brand toy paint is suitable for PS, HIPS, ABS substrates, modified plastics, sports equipment, toys, fairy lights, household showers, etc.IV. Technical Parameters:No. Item Parameter1 Baking Conditions 50～70° (bake for 30 minutes) specific to customer requirements2 Spraying Viscosity 9～13s (25℃, Iwata No. 2 cup)3 Spraying Pressure 3～4.5kg/㎡4 Spraying Distance 10～20cm5 Film Thickness 15～25um (wet film gauge)6 Hardness HB～H (ASTM D3363) (Mitsubishi pencil)7 Gloss (BS 3900 D5 60) ＞80%8 Specific Gravity 0.93-1.20 depending on color (ASTM D1475)9 Solid Content 30-50% depending on color10 Adhesion 0～1 grade (100% cross-cut method)11 Coating Viscosity 85±5KU／25°C (depending on different colors) (ASTM D4287)12 Surface Dry Time ≤30min／30℃13 Through Dry Time ≤24H／30℃14 Shelf Life One year／25℃ in a cool, dry place15 Dilution Ratio Paint 1: Thinner 1.5 by weight (specific to customer spraying requirements)Material Compliance: Conforms to heavy metal safety standards such as ASTM F963-08, EN71 Part 3 : 1994, Japan Part 3 : 2002 section 1.5, 16 CFR 1303, CHPA CH-3 Schedule I Part I Item 9, GB 6675-2007, etc., for organic and inorganic pigments.Application Conditions: Surface Treatment: Degreasing, cleaning, drying.

Epoxy asphalt anti-corrosion coating

Epoxy Asphalt Anti-corrosion Coating I. Product Introduction Epoxy asphalt anti-corrosion coating is a composite coating based on epoxy resin and asphalt. Its basic principle is to form a strong and dense protective layer through the synergistic effect of epoxy resin and asphalt in the coating, to resist environmental corrosion factors. This coating is mainly composed of epoxy resin, asphalt, pigments and fillers, additives, and solvents, and has excellent anti-corrosion performance, adhesion, and wear resistance. Product Features: Excellent Anti-corrosion Performance: It has good resistance to various corrosive media such as acids, alkalis, and salts, effectively preventing corrosion of metal surfaces. Good Adhesion: Forms a strong bond with metal surfaces, not easy to peel off. Excellent Wear Resistance: The coating surface is smooth and hard, with good wear resistance. Easy Construction: Can be applied by brushing, spraying, rolling, and other methods, with fast drying speed and short curing time. III. Scope of Application Epoxy asphalt anti-corrosion coating is widely used in petroleum, chemical, bridge, dock, power, and water conservancy fields for anti-corrosion protection of metal pipelines, storage tanks, bridge structures, steel structures, etc. IV. Construction Process and Precautions: Construction Methods: Substrate Preparation: Remove oil stains, moisture, rust, and old coatings from the substrate surface. Coating Preparation: Mix all components evenly according to the formula. Coating Application: Select appropriate coating tools and methods, and apply the coating evenly to the substrate surface. Curing Treatment: Control the temperature and humidity of the application environment to allow the coating to cure within the specified time. Precautions: Control Application Environment: Avoid construction in high humidity, high temperature, or low temperature environments to prevent affecting the curing speed and performance of the coating. Control Coating Thickness: Avoid issues such as cracking and peeling due to excessively thick coatings, and ensure the coating thickness meets anti-corrosion requirements. Pay Attention to Safety Protection: During construction, ensure good ventilation to avoid inhaling paint volatiles; wear protective glasses, gloves, and other protective equipment to prevent direct skin contact with the paint. IV. Storage and Safety Protection: The product should be stored in a cool, well-ventilated place, away from direct sunlight, and isolated from ignition sources and heat. Keep dry and clean during construction, strictly prohibit contact with water, acids, alcohols, alkalis, etc.; after mixing the paint, the curing agent packaging drum must be tightly sealed to prevent gelling. Operators should wear safety masks and gloves to avoid skin or eye contact; if accidental contact occurs, rinse with clean water.

Water-based high-temperature paint coating

水 性 高 温 涂 料 一、产品简介： 水性高温涂料是一种特殊的涂料，其设计目的是在高温环境下仍能保持良好的性能。这些涂料通常用于需要长期承受高温的设备或结构上它采用水作为主要的稀释剂，从而降低了VOC（挥发性有机化合物）的排放，更加环保。主要成分及其作用 主要成分及其作用： 水性树脂：水性树脂是水性高温涂料的主要成膜物质，决定了涂料的粘附力、硬度、耐磨性等基本性能。树脂的种类和性质对涂料的性能有重要影响。 颜料：颜料为涂料提供颜色，同时也可增强涂层的耐候性和遮盖力。颜料的选择应考虑到其在高温下的稳定性。 助剂：助剂在涂料中起到调节流变性、控制干燥速度、增强涂层性能等多种作用。 二、产品特点： 耐高温稳定性能优越：这些涂料能够承受极高的温度，一般可超过800℃，甚至达到1500℃以上不等，具体取决于涂料的种类。 优异的防腐性能：水性高温涂料能够抵抗化学腐蚀和氧化，从而保护被涂物体免受腐蚀破坏。 良好的附着力：这些涂料能够紧密地附着在被涂物体表面，不易脱落或龟裂。 优异的耐磨性能：采用特殊的耐磨添加剂，使水性高温涂料具有优异的耐磨性能，适用于高磨损环境。 耐腐蚀性能：水性高温涂料具有良好的耐腐蚀性，能够抵抗高温下的化学腐蚀和氧化，保护基材不受损害。 环保性能：水性高温涂料以水为溶剂，不含有机溶剂，有利于环境保护更加环保。 施工简便：水性高温涂料在施工过程中可以通过喷涂或滚涂的方式应用，操作简单方便。同时，其干燥和固化速度快，可以大大提高施工效率。 三、技术指标： PH:       5.5±0.5 粘度   12±2S 施工准备：底材雷喷砂8 0 — 1 0 0目，喷涂时底材的温度4 0 — 5 0 ℃ ①涂料厚度： 2 5±5μm喷涂喷枪口径：1— 1. 2¢ ②空气压力： 3 — 4KG/C ㎡ ③使用酒精混合水洗洁喷涂枪 烘干温度：在 240 °C±10 °C 下 15-25 分钟 如果是 3 段炉，全程 20-35 分钟 第一段：35-50 °C(5 分钟） 第二段：80 °C（5 分钟） 第三段：220 °C 保持 15 分钟 耐热高温：1000 °C*12 小时无异常 铅笔硬度：6-7H(三菱铅笔）（烘烤放置 3 天后） 耐水性：耐沸水煮2小时，无异常 耐醇性：2.5％H,SO 溶液，12/15 浸渍，24 小时，无异常。 耐碱性：2.5％Na,CO ，溶液里，12/15 浸渍，24 小时，无异常。 附着力：100/100.    1 级 耐磨性：1KG 力百洁布测试 10000 次以上。 四、适用范围： 锅炉行业：在锅炉内部使用水性高温涂料可以有效提高锅炉的热效率，同时减少热量损失，延长锅炉使用寿命。 引擎行业：水性高温涂料在引擎部件上的应用可以抵抗高温氧化，提高引擎的性能和可靠性。 航空航天：在航空航天领域，水性高温涂料可用于飞机和火箭的高温部件，如发动机燃烧室和隔热层。 石油化工：在石油化工行业，水性高温涂料常用于炼油设备、高温管道和储罐的防腐保护。 五、施工流程及步骤： 材料选择：确保选购到质量上乘、性能稳定的水性高温涂料，并检查产品的合格证、生产日期等信息。 设备检查：准备好喷涂或滚涂设备，并检查其工作状态，确保在施工过程中能够正常运行。 环境条件：确保施工环境温度、湿度等条件符合涂料施工要求，避免在高温、高湿或大风等不利环境下施工。 基层检查：确保基层干燥、清洁、无油污、无灰尘，并进行必要的修复和打磨。 施工注意事项： 施工过程中要保持通风良好，避免吸入涂料挥发的气体。 注意施工温度和湿度的变化，以确保涂料的施工质量。 施工方法与步骤 基层处理：对基层进行打磨、清洁，确保表面平滑、干燥、无油污。 搅拌与稀释：按照产品说明书的要求，对水性高温涂料进行搅拌和稀释，添加适量的自来水，确保涂料均匀、无沉淀。 喷涂或滚涂：采用喷涂或滚涂的方法将涂料均匀涂抹在需要耐高温的物体表面。施工过程中要注意涂抹的厚度、均匀性等问题，避免出现漏涂、厚薄不均等现象。 干燥与固化：施工完成后，要保持涂层表面干燥、清洁，避免阳光直射或水淋。按照产品说明书的要求，等待涂料完全固化。 质量控制与安全防范： 质量控制：在施工过程中，要定期检查涂料的施工质量，确保涂层厚度、均匀性、附着力等指标符合设计要求。 安全防范：施工人员要佩戴好防护用品，如手套、口罩等。同时，要保持施工区域通风良好，避免涂料挥发产生的有害气体对人体造成伤害。 工程进度与成本控制： 工程进度计划：制定详细的工程进度计划，合理安排施工时间、人员、设备等资源，确保工程按期完成。 成本控制策略：通过合理控制材料使用量、降低设备维护成本、提高施工效率等措施，降低工程成本。同时，要加强对施工过程的监控和管理，避免浪费和损失，环境保护与污染防治 环境保护：在施工过程中，要尽量减少对周边环境的影响。例如，避免在风力较大时施工，减少涂料挥发产生的有害气体对周围环境的污染。 贮存与安全防护： 存放于阴凉干燥处，避免阳光直射和高温； 保持包装容器密封，防止水分和杂质进入； 产品开封后应尽快使用，避免长时间暴露在空气中；远离火源，禁止吸烟。 安全措施和环境保护要求： 施工时应穿戴防护服、手套和眼镜，避免与皮肤和眼睛直接接触； 保持施工环境通风良好，避免长时间吸入涂料挥发物； 施工后应将废弃涂料和包装容器妥善处理，符合当地环保要求； 如发生涂料泄漏或污染，应立即采取措施进行清理和处置。