Welcome to Jiangmen Tufeng Chemical Co., Ltd.
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
TF-666 Special Anti-Cratering Additive
TF-666 Special anti-shrinkage crater additives 1. Description: This product is a special silicone type, with fast leveling, general smoothness, anti-shrinkage and anti-oil pollution, and good compatibility. It can be used in metal baking paint, glass baking paint, two-component paint, self-drying wood paint, and various industrial coatings without affecting the gloss of the coating film. Especially for two-component coatings of acrylic/polyurethane series, it has excellent leveling and defoaming effects. TF-666 can also prevent the occurrence of crater【Creater】fish eye pinholes and other phenomena. Second, technical indicators: appearance: transparent liquid
- Product Description
-
TF-666 Special anti-cratering additive
1. Description:
This product is a special silicone type, with fast leveling, general smoothness, anti-shrinkage crater and anti-oil stain, and good compatibility. It can be used in metal baking paint, glass baking paint, two-component paint, self-drying wood paint, and various industrial coatings without affecting the gloss of the coating film. Especially for two-component coatings of acrylic/polyurethane series, it has excellent leveling and defoaming effects. TF-666 can also prevent the occurrence of crater【Creater】fish eye pinholes and other phenomena.
2. Technical indicators:
Appearance: transparent liquid Hue: APHA200
Non-volatile matter: 100% Viscosity: 20mpa.s[25℃]
Composition: Special silicone type Specific weight: 0.945
3. Scope of use:
所有油性系列皆适用,特别建议用于:
● One-component self-drying/two-component acrylic/polyurethane coating
● Two-component polyester resin/polyurethane coating
● Baking coatings such as polyester resin/amino resin
4. Usage and dosage:
TF-666 can be added during the manufacturing process of coatings and paints, and can also be added after the manufacturing process of coatings and paints. The added amount is 0.2-1% by weight to the total amount.
5. matters needing attention:
1. When the temperature is lower than 18°C, the product will be turbid until it solidifies (caused by the structure of the product itself). It needs to be heated and dissolved before use. Repeated solidification and reheating will not affect the use effect; for the convenience of use.
2. Storage and validity period: Store unopened at room temperature, and the product is valid for 24 months. Non-flammable, shipped as conventional chemicals.
3. Finished product packaging: 5KG/25KG plastic drum, 25KG/200KG iron drum
Previous Page:
Next Page:
Related Products
Product Message
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!