Welcome to Jiangmen Tufeng Chemical Co., Ltd.
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
DB-2B Polyurethane Two-Component Paint Series
DB-2B acrylic paint film has full luster, excellent weather resistance, water resistance and gasoline resistance, good gloss and color retention, excellent comprehensive performance, fast drying speed and convenient construction.
- Product Description
-
1. Introduction
DB-2B acrylic paint film has full luster, excellent weather resistance, water resistance and gasoline resistance, good gloss and color retention, excellent comprehensive performance, fast drying speed and convenient construction.
2. Ingredients
Hydroxy acrylic gum, pigments, additives, solvents, etc.
Curing agents, isocyanates, polyurethanes, thinners, etc.
3. Performance
This product can be used for surface varnishing of metal and plastic products, and has the characteristics of good chemical resistance, excellent leveling, high fullness, good hardness, water resistance and weather resistance.
4. Use
For motorcycles, automobiles, household appliances, mechanical metals and various metals such as ABS, PS, PC, HIPS, etc.
The plastic surface has excellent adhesion, and the product is widely used.
5. Product types
1. Two-component paint
2. Two-component glitter paint
3. Two-component pearlescent, phantom paint
4. Two-component varnish
5. Complete varieties, formulas can be formulated according to the requirements and color properties provided by customers
6. Construction parameters
Project
Construction parameters
Open dilution ratio
Varnish - Paint: Hardener: Thinner = 2:1:2
Color paint - paint: hardener: thinner = 6: 1: 4~6Spray viscosity (NK-2# cup 20℃)
9-14
Drying time(70℃/30min)
Dry, toasted
luster
≥90
Hardness
≥2H
Weather resistance
600-1000 hours
Alcohol resistance 99% ethanol = 4.9N (0.5kgf)
100 times
Standard film thickness(um)
10-20
7. paint film performance
Project
Index
Inspection standards
Appearance and color of paint film
Flat and smooth, the color conforms to the sample
GB1729
luster(60℃)%
Varnish, various colors
≥94
GB9754
Matte, Glitter Paint
Compliant with the target
Dryness,H
(Plastic) 60-70℃ BBQ
4
GB1735
(Hardware) Bake at 80℃
4
Adhesion (Cross-Hatch)
100/100
GB9286
Pencil hardness
After drying ≥HB 2H after hard drying
GB6739
Water resistance(40℃)240h
No significant changes
GB/T1733
Detergent resistance,24h
No significant changes
Immerse in saturated washing solution at room temperature
Acid resistance,24h
No significant changes
Immerse in 0.1HN2SO4 solution at room temperature
Alkali resistance,24h
No significant changes
Immerse in 0.1N NaOH solution at room temperature
Mixed xylene resistance
No yarn marks, reduced gloss and obvious gauze coloring
Dip a cotton gauze with a mixture of xylene: ethanol = 6: 4 and wipe the paint film back and forth 8 times
Volatile oil resistance,10h
No discoloration, dissolution, swelling, etc.
Immersion at room temperature (90#) gasoline:toluene=4:1 mixed solution
Heat resistance,10h
No significant changes
GB1740
Salt spray resistance,120h
No significant changes
GB1771
Weather resistance, 40h artificial accelerated aging
Loss of light level, discoloration level
ASTMG53
8. Precautions
1. The paint should be fully stirred before use, and must be used up within 4 hours after mixing with the curing agent, so as not to affect the effect;
2. The product should be stored in a cool and ventilated place, protected from fire, leakage, sun protection, high temperature, and away from fire sources;
3. Operators should wear safety masks and gloves to avoid contact with skin or eyes, and should be washed with clean water in case of accidental contact.
Previous Page:
Next Page:
Related Products
Product Message
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!