Welcome to Jiangmen Tufeng Chemical Co., Ltd.
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
DB-3C Acrylic Plastic Paint Series
DB-3C acrylic plastic paint is a plastic paint with international level developed by our company by introducing foreign advanced technology. The paint has strong adhesion, good abrasion and alcohol resistance, bright colors and wide climate adaptability. PS, PC, HIPS and other plastic substrates are widely used.
- Product Description
-
1. Introduction
DB-3C acrylic plastic paint is a plastic paint with international level developed by our company by introducing foreign advanced technology. The paint has strong adhesion, good abrasion and alcohol resistance, bright colors and wide climate adaptability. PS, PC, HIPS and other plastic substrates are widely used.
2. Ingredients
Thermoplastic acrylic resins, pigments, additives, solvents, etc.
3. Performance
1. The coating film dries quickly, can be self-drying or drying, high hardness, strong adhesion, etc.;
2. Excellent appearance, good flatness, fine and uniform, and good recoatability;
3. Good alcohol resistance, cold and heat cycle can be below -40 ℃ without cracking;
4. The primer and topcoat have good compatibility, and the paint will peel off without medical treatment.
4. Use
1. It can be used to spray the shells of various household appliances such as computers, mobile phones, shavers, cameras, TV sets, etc.;
2. It can be used to spray plastic parts of motorcycles, cars and other industrial products.
5. Product types
1. Plastic finish
2. Plastic primer
3. Complete varieties, formulas can be formulated according to the requirements and color properties provided by customers
6. Construction parameters
Project
Construction parameters
Open dilution ratio
Paint: Thinner = 1: 1.5~2
Spray viscosity (NK-2# cup 20℃)
9-12
leveling time(min)
3-5
Dry naturally
Surface dry:10 min,Hard work:12 min
Forced drying
60℃×30min
Standard film thickness(um)
10-15
7. Paint film performance
Project
Index
Inspection standards
Appearance and color of paint film
Smooth
GB1729
luster(60℃)%
Special black
≥85
GB9754
Matte, glitter paint other color paint
Compliant with the target
Hiding power,g/m2
Not lower than the target
JLSK5400-85.6.2
Adhesion (Cross-Hatch)
100/100
GB9286
Pencil hardness
≥H
GB6739
Water resistance(40℃)240h
No significant changes
GB/T1733
Detergent resistance,120h
No significant changes
Immerse in 5% chemical cleaning solution at room temperature
Ethanol resistance
No significant changes
Use cotton gauze soaked in alcohol to wipe the paint film back and forth 100 times with a force of 500g
Alkali resistance,24h
No significant changes
Immerse in 0.1N NaOH solution at room temperature
Volatile oil resistance,30min
No discoloration, dissolution, swelling, etc.
Immersion at room temperature (90#) gasoline:toluene=4:1 mixed solution
Heat resistance,120h
No wrinkles, breakage, pores, peeling, etc.
GB1740
Weather resistance, 200h artificial accelerated aging
No significant changes
ASTMG53
8. Precautions
1. Paints and thinners should be sealed and stored in a cool place, protected from fire, leakage, sun protection, high temperature, and away from fire sources.
2. The storage period of paint is more than one year.
3. After the paint is opened, it should be fully stirred to prevent the pigment from sinking to the bottom and causing color difference.
4. If the surface of the workpiece has dust, particles, oil and other attachments, it will damage the appearance, so it should be wiped clean before spraying.
5. Due to different plastic substrates, it should be fully tested before spraying, so as not to affect the paint adhesion.
Previous Page:
Next Page:
Related Products
Product Message
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!