Welcome to Jiangmen Tufeng Chemical Co., Ltd.
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
DB-9K Rubber Paint Series
DB-9K elastic rubber paint is a two-component polyurethane paint. The product after spraying has a special soft feeling, which makes the painted product comfortable and high-grade, thereby greatly improving the added value of the product.
- Product Description
-
1. Introduction
DB-9K elastic rubber paint is a two-component polyurethane paint. The product after spraying has a special soft feeling, which makes the painted product comfortable and high-grade, thereby greatly improving the added value of the product.
2. Ingredients
Mixed with polyurethane resin, special additives, solvents, etc.
3. Scope of application
Surface coating of sports equipment products, binoculars, communication products, telephones, audio-visual products, MP3, computer mouse, interior decoration of cars, various plastic electronic products
4. Construction instructions
1. Before construction, the surface should be degreasing, rust and dirt, and dried;
2. Construction ratio - elastic paint: curing agent: thinner = 10:1:3 (depending on the spray effect can be adjusted appropriately)
3. The elastic paint and curing agent must be fully mixed and evenly filtered before use. The dry film thickness is 20-40mm. The sprayed workpiece should be
4. Put it in a dust-free space for 5-10 minutes and put it in the oven to dry after it becomes dumb.
5.70±5℃/30~40min.
5. Paint film performance
Project
Index
Inspection standards
Appearance and color of paint film
smooth and soft
GB1729
luster(60℃)%
≤8℃Compliant with the target
GB9754
Adhesion (Cross-Hatch)
100/100
GB9286
Water resistance(40℃)24h
No significant changes
GB/T1733
Detergent resistance,120h
No significant changes
Immerse in 5% chemical cleaning solution at room temperature
Ethanol resistance
No significant changes
Use cotton gauze soaked in alcohol to wipe the paint film back and forth 50 times with a force of 300g
Moisture and heat resistance,120h
No wrinkles, breakage, pores, peeling, etc.
GB1740
Weather resistance, 200h artificial accelerated aging
No significant changes
ASTMG53
6. Matters needing attention
Before the paint is used, the sediment at the bottom of the barrel should be fully stirred evenly to avoid inconsistency in matteness. The adjusted paint must be used up within 4 hours to avoid affecting the effect.
Previous Page:
Next Page:
Related Products
Product Message
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!