Welcome to Jiangmen Tufeng Chemical Co., Ltd.
TEL: +86-750-3988386
Oil based industrial paint
-
DB-1A Acrylic Metal Baking Paint Series
-
DB-2B Polyurethane Two-Component Paint Series
-
DB-3C Acrylic Plastic Paint Series
-
DB-4D Alkyd Antirust Paint Series
-
DB-7G Epoxy Anti-rust And Anti-corrosion Primer
-
DB-7G Epoxy Anti-Rust And Anti-Corrosion Paint Series
-
DB-7G High-temperature Anticorrosive Coating Is resistant To 300 Degrees
-
DB-8H Fluorocarbon Paint Series
-
DB-9K Rubber Paint Series
-
DB-11M High Temperature Paint Series
-
DB-12N Floor Paint Series
-
DB-16T Thermal Insulation Coating Series
-
DB-17 Polyurea Waterproof Coating Series
-
DB-18V Oil-Based Exterior Wall Paint Series
-
Polyamide Side Lacquer
-
Epoxy Cloud Iron Intermediate Paint
-
Epoxy Rich In Zinc Primer
-
Chlorinated Rubber Anti-corrosion Coating Material
-
Highly Chlorinated Polyethylene Anti-corrosion Coating
-
Water-resistant Coatings
Water-resistant coatings
Water-resistant coatings
1. Product introduction
This product is mainly composed of epoxy resin, ceramic resin, anti-rust pigment, filler, additives, solvents, etc., the coating is hard, wear-resistant, rust-proof and waterproof, salt spray resistant. This product is a two-component amine-cured epoxy ceramic waterproof coating, which can be applied by heating spraying, room temperature spraying, brushing, roller coating and other methods.
Second, product features
1. Suitable for mechanical spraying, can be thickly coated at one time, dense coating, no pinholes, saving materials, time, labor, and reducing costs, which is the direction of the development of the coating industry. The thick slurry type contains a small amount of solvent and the solid content is ≥ 85%, which is suitable for manual construction.
2. The coating is hard, tough, water-resistant, wear-resistant, chemical-resistant to corrosion, excellent anti-corrosion performance, and is the best internal anti-corrosion material.
3. It can be heated or coated at room temperature, cured at room temperature, and the construction method is simple and easy.
3. Scope of application
1. Due to the hard coating and low wear coefficient, it is suitable for the inner coating of steel pipes, cast iron pipes and concrete pipes, which can reduce wear resistance and increase the throughput.
2. Due to good wear resistance, it is suitable for coating the inner wall of pipelines containing solid particles of slurry water, sewage, rainwater and river water, which can extend the service life of pipelines.
3. High mechanical strength and large adhesion, suitable for internal and external anti-corrosion of steel storage tanks, concrete, cool water towers, sewage plants, wharves and other equipment.
5. Construction instructions
1. Mixing ratio: material A: material B = 5:1 (weight ratio).
2. Construction method: spraying or brushing (a small amount of solvent can be added).
3. Use period after mixing: with the increase of paint temperature, the use period is shortened.
Note: If you need more detailed information, please obtain the construction work instruction from our company.
4. Technical indicators
Check the results |
|||||
project |
Technical indicators |
Test results |
Measured |
Measurement method (national standard) |
|
Product color |
Conform to the template |
Symbols |
grey |
Visual |
|
Varnish appearance (visual) |
Smooth and smooth without impurities |
Symbols |
Flat and smooth |
CB1721-79 |
|
luster |
Matte |
accord with |
28° (60° angle). |
GB1743-79 |
|
Solids content:% |
85 |
Symbols |
82 |
GB/T1725-2007 |
|
Fineness μm |
≤30 |
Symbols |
25 |
|
|
Hardness: h |
≥2 |
Symbols |
2 |
GB/T6739-2006 |
|
Drying time |
Table stem (min). |
≤20 |
Symbols |
1 |
GB/T1728-1989 |
Practical (h). |
≤24 |
Symbols |
24 |
GB/T1728-1989 |
|
Bending resistance (mm). |
2 |
Symbols |
2 |
GB/T1731-1993 |
|
Impact strength (cm). |
50 |
Symbols |
50 |
GB/T1732-93 |
|
Adhesion: (Grade) |
1 |
Symbols |
1 |
GB1720-79 |
|
Salt spray resistance: h |
≥ 500 hours |
Symbols |
No foaming, no rust, no shedding |
GB/T1771-2007
|
VII. Precautions
1. Use the epoxy ceramic coatings, thinners, epoxy putty and epoxy repair materials supplied by the company.
2. When storing or transporting, the iron drum should be placed upright, away from the fire source, and avoid sun exposure.
3. Store in a cool, dry, ventilated, adjacent to a non-fire warehouse, and have a shelf life of one year in the original container.
CONTACT US

Add: Longan Industrial Zone, Duruan Town, Pengjiang District, Jiangmen City, Guangdong Province

Tel: +86-750-3988386

Mobile: +86-13822383835 (Ms. Wang)

Mobile: +86-13536058518 (Engineer Li Gong)

Email: sales@jmtufeng.com
FEEDBACK
Copyright © 2022 Jiangmen Tufeng Chemical Co., Ltd. 粤ICP备17115341号 SEO tags