High-temperature anticorrosion coating, resistant to 300 degrees

DB-7G High temperature Anti-corrosion Paint resistance 300 Degree

I. Product Features:

  DB-7G High temperature anti-corrosion The coating of high-temperature anti-corrosion paint has good heat resistance, 30 0℃ ) under high temperature conditions oil resistance, acid resistance, peel resistance and excellent nitrate stress corrosion resistance, which can prolong the service life of blast furnaces and hot blast stoves.

II. Application range:

Widely used in the inner and outer walls of blast furnaces and hot blast stoves in the chemical industry 、hot blast stoves inner outer walls and vault , and can also be used for chimneys, flues, high-temperature hot gas pipelines, heat exchangers and other metal surfaces requiring high-temperature anti-corrosion protection.

III. Performance indicators:

IV. Construction parameters:

1、 Construction conditions: Ambient temperature 5℃ ~ 35℃ , relative humidity ≤ 80 %. Construction is not suitable in rainy, snowy or foggy days.

2、 Substrate treatment: Sandblasting to Sa2.5 level, surface roughness 35 ~ 70μm 。

3、 Construction method: High-pressure airless spraying is recommended, and air spraying and roller coating can also be used.

4、 Paint ratio: By weight ratio A : B=5 :1 , mix thoroughly.

5、 Reference dosage: 200 ~ 220g/m2 (Dry film thickness not less than 20μm ) 。

6、 thin solution Agent: Special thinner, the amount shall not exceed 5 % of the total weight of the paint.

7、 Previous coating: Zinc silicate anti-rust paint.

V. Safety protection:

1、 Before construction, safety education must be given to the construction personnel and management personnel.

2、 When storing, mixing and constructing the paint, pay attention to ventilation, prohibit smoking and open flames, and must be equipped with fire-fighting equipment. Explosion-proof electrical equipment, lighting fixtures and switches should be selected at the construction site.

3、 Construction personnel should wear protective equipment. When the skin comes into contact with the paint, it should be wiped clean with thinner immediately, and then washed with clean water. Cleaning containers or tools can use thinner, but the amount should not be too much, and it must be carried out in a ventilated place.

VI. Packaging specifications:

A Group Division 20kg/ Barrel, iron barrel packaging ； B Group Division 4kg/ Barrel, Iron barrel packaging.

VII. Storage Period ：

Store in a cool, ventilated, and dry place, with a shelf life of one year. Coatings exceeding the shelf life can only be used after passing inspection.